InSight DeepSee Ultrafast Lasers

Spectra-Physics introduces InSight™ DeepSee™, an extraordinary new ultrafast laser system that takes multiphoton imaging to new depths. Based on a novel proprietary technology, the new InSight DeepSee delivers nearly double the tuning range of existing ultrafast lasers and provides seamless access to long infrared wavelengths for deepest in vivo imaging. Robust and fully automated, InSight DeepSee provides easy-to-use, hands-off operation, freeing users to focus on their critical research.

InSight DeepSee features an unprecedented 680 nm to 1300 nm continuous tuning from a single source, short 100 fs pulse widths and highest peak power levels into the infrared where imaging penetration depth is maximized. Spectra-Physics’ integrated patent pending DeepSee, the industry standard dispersion pre-compensator, delivers the short pulses through a microscope to the sample for maximum fluorescence. InSight DeepSee also has exceptional beam pointing stability, beam quality and output power stability, making it ideal for microscopy.

A dual wavelength option with a second output beam complementing the main tunable output is available for advanced imaging techniques including uncaging, CARS imaging and multimodal imaging. This fully automated ultrafast laser can be seamlessly tuned with the click of a mouse to any wavelength within seconds at speeds over 50 nm/sec. InSight DeepSee is designed, built and tested to our highest quality standards for reliable hands-free operation.

  • Broadest tuning range: 680 nm to 1,300 nm for deepest imaging
  • Short pulse width and highest peak power for maximum fluorescence
  • Integrated DeepSee™ to deliver short pulses to the sample
  • Ideal beam characteristics optimized for multiphoton imaging
  • Fully automated, turn-key system
  • Dual wavelength option for uncaging, CARS and multi-modal imaging

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more