Reduction in HSE Inspections has Implications for Employers
A reduction in HSE inspections is one of the outcomes from the UK Government's reforms to the health and safety system, which it announced in March 2011. A joint statement from the HSE (Health and Safety Executive) and the Local Government Group, in May 2011, aimed to help local authority (LA) regulators determine how and when to use proactive interventions (usually taking the form of unannounced inspections). Available to view as a PDF, the document is entitled Joint guidance for reduced proactive inspections.
On the one hand, businesses may be relieved that they no longer have to be prepared for visits by inspectors, though high-risk premises might still be inspected at any time (see the HSE's publication HSC14, What to expect when a health and safety inspector calls. In fact the aggregate number of inspections is only expected to fall by one-third.
However, the reduction in HSE inspections means that businesses need to be more careful about their health and safety - and not take the view that any shortcomings will be identified for them by an HSE inspector. Moreover, the HSE will be placing a greater emphasis on reactive work, so any complaints, accidents or incidents may be investigated more rigorously.
Employers have an existing duty under the Provision and Use of Work Equipment Regulations 1998 (PUWER 98) to ensure the safety of work equipment. Most companies have now undertaken PUWER inspections, but it should be remembered that PUWER requires equipment to be inspected to ensure that it continues to remain safe to use. Although no inspection period is mandated (it depends on the nature of the risks), annual inspections should be considered as a starting point.
In addition to PUWER, employers have obligations under the Health and Safety at Work etc Act. Considering these two pieces of legislation together, and the reduction in HSE inspections, it is essential that employers check their work equipment periodically. While this is relatively straightforward for equipment such as hammers and knives, machinery inspections require a higher level of competence. For example, it is insufficient merely to check that the original safety measures are still in place and operating as required, because the measures on old equipment may no longer be deemed adequate.
To help employers meet their obligations, Procter Machine Guarding offers free Guarding Compliance Surveys, which are suitable for almost all potentially hazardous types of machinery, ranging from standalone machines to complex assemblies. After an initial telephone consultation, safety engineers can make an appointment to visit an organisation's premises and assess the machinery safeguards. At the end of the survey the engineers provide a short written report that identifies any areas of non-compliance and actions that can be taken to reduce risk, improve safety and comply with the Regulations. Importantly, Procter can also carry out any work necessary to bring the machinery up to standard, which might include standard machine shop guards or custom-designed machine guards.
In addition, Procter Machine Guarding has published a free Guide to Workshop Safety that will benefit anyone responsible for the safety of machinery and work equipment. Packed with advice, hints and tips, the guide includes sections on the following topics: costs and benefits; regulations and legislation; general requirements for machine guards; specific machine types; other measures relating to machinery safety; standards; official information and guidance; useful resources; and sources of further information.
On the one hand, businesses may be relieved that they no longer have to be prepared for visits by inspectors, though high-risk premises might still be inspected at any time (see the HSE's publication HSC14, What to expect when a health and safety inspector calls. In fact the aggregate number of inspections is only expected to fall by one-third.
However, the reduction in HSE inspections means that businesses need to be more careful about their health and safety - and not take the view that any shortcomings will be identified for them by an HSE inspector. Moreover, the HSE will be placing a greater emphasis on reactive work, so any complaints, accidents or incidents may be investigated more rigorously.
Employers have an existing duty under the Provision and Use of Work Equipment Regulations 1998 (PUWER 98) to ensure the safety of work equipment. Most companies have now undertaken PUWER inspections, but it should be remembered that PUWER requires equipment to be inspected to ensure that it continues to remain safe to use. Although no inspection period is mandated (it depends on the nature of the risks), annual inspections should be considered as a starting point.
In addition to PUWER, employers have obligations under the Health and Safety at Work etc Act. Considering these two pieces of legislation together, and the reduction in HSE inspections, it is essential that employers check their work equipment periodically. While this is relatively straightforward for equipment such as hammers and knives, machinery inspections require a higher level of competence. For example, it is insufficient merely to check that the original safety measures are still in place and operating as required, because the measures on old equipment may no longer be deemed adequate.
To help employers meet their obligations, Procter Machine Guarding offers free Guarding Compliance Surveys, which are suitable for almost all potentially hazardous types of machinery, ranging from standalone machines to complex assemblies. After an initial telephone consultation, safety engineers can make an appointment to visit an organisation's premises and assess the machinery safeguards. At the end of the survey the engineers provide a short written report that identifies any areas of non-compliance and actions that can be taken to reduce risk, improve safety and comply with the Regulations. Importantly, Procter can also carry out any work necessary to bring the machinery up to standard, which might include standard machine shop guards or custom-designed machine guards.
In addition, Procter Machine Guarding has published a free Guide to Workshop Safety that will benefit anyone responsible for the safety of machinery and work equipment. Packed with advice, hints and tips, the guide includes sections on the following topics: costs and benefits; regulations and legislation; general requirements for machine guards; specific machine types; other measures relating to machinery safety; standards; official information and guidance; useful resources; and sources of further information.
Comments