New Emission and Susceptibility Tests to RTCA/DO 160

Teseq, a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, announces the introduction of the aerospace DO 160 RF emission and susceptibility test application for use in Compliance 5 EMC test software.

This dedicated application makes setting up and testing fast and simple. Preloaded example hardware configurations, limit lines etc. enable the user to quickly configure their hardware and select the particular test required.

The new update supports both E and F versions of the standard including conducted and radiated emission and susceptibility, ensuring tests can be performed with a minimum of setting up.

Teseq Compliance 5 RF Emission and Immunity test software is the definitive software environment for RF EMC testing, providing a sophisticated, fully featured RF EMC software package capable of performing all types of EMC emissions and immunity testing in standard and specialised applications.

It is available in two versions, Compliance 5 RF Emissions and Compliance 5 RF Immunity, which can be used together or independently. Compliance 5 provides a single, integrated test platform for every RF EMC test requirement. Compliance 5 is multi-user with administrator control making it suitable for commercial test laboratories and manufacturers. Compliance 5 allows the user to configure tests while giving the administrator overall control of important files such as transducer factor files, calibration data and results.

Industry specific application test packages ensure that set-up time is minimised while providing fully compliant, fast, efficient and repeatable testing. Optional packages are available for Military, Automotive and Reverberation Chamber testing. Reporting is made easy using the Teseq "Global Report" function which automatically places selected information from the test into a pre-existing template document.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more