Saelig Announces Advanced 350MHz AFG Signal Generators

Saelig Company, Inc. announces its availability of the Wave Standard series of advanced Arbitrary Function Generators from Tabor (Israel). Offering up to 350MHz in single and dual channels, WS8351 and WS8352, deliver fast, versatile, high-performance arbitrary waveform, function, and pulse generation.

Designed to fulfill the growing needs of today’s design and test engineers, these new models boast a 2GS/s clock with a 512k memory and up to 4Vpp output into 50 ohms. This allows the generation of a wide variety of complex waveforms at very high speeds. In addition to its function and arbitrary capabilities, these ultra-fast WS models can generate high-precision pulses with extensive pattern composition utilizing PulseComposerTM pulse/pattern composer application software.  PulseComposerTM includes special modes such as: programmable transition times, multi-level patterns, arbitrary bit design and PAM(n), utilizing either NRZ or RZ modes with data rates reaching as high as 350MBit/s.

Key Features Include:
  • Single or dual differential channels configured as separate or synchronized
  • 350MHz sine and 250MHz square waves
  • 2GS/s, 14-Bit, 512Kpoint arbitrary waveforms
  • 4Vp-p into 50Ω (8Vp-p differential), double into open circuit
  • AM, FM, FSK, PSK and Sweep modulations
  • Powerful PulseComposerTM for up to 350MBit/s analog, digital and mixed signals device tests
  • User friendly front panel with 4” color TFT LCD display
  • Remote control through GPIB, USB2.0 and 1GBit LAN with LXI Class C compliance
  • Store/recall capability on disk-on-key or 1GB internal memory
  • Free ArbConnection software, IVI and MATLAB drivers

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more