Laird Technologies Expands Electrically Conductive Elastomer Line with EcE72 Silicone Gasket

Laird Technologies, Inc., a global leader in the design and supply of customized performance-critical components and systems for advanced electronics and wireless products, today announced it has expanded its electrically conductive elastomer (EcE) product line with the release of its new EcE72 silicone gasket.

Utilizing both conductive and non-conductive materials, the EcE72 gasket is a nickel/graphite filled silicone elastomer that affords excellent EMI shielding properties and conductivity. Consisting of pure silicone, the gasket provides a stronger environmental seal at temperature extremes. It is flame retardant (developed to meet UL94 V-0 standards), and mold and mildew resistant.

“The EcE72 silicone gasket is a very cost-effect EMI shielding product. It is designed to meet UL 94 V-0 flammability requirements, and is mold and mildew resistant; making it ideal for outdoor environments,” said John Slagle, Laird Technologies Product Line Manager for North America and Europe - ECE, FIP, and Absorbers. “It may be die-cut, molded, or extruded in various shapes, sizes, and profiles, allowing it to fit a number of applications for industrial equipment, telecom enclosures, and demanding military applications.”

EcE72 is ideal for applications that require EMI shielding above 100dB along with an environmental seal. It also demonstrates great reliability with a compression set below 20%.

As an industry-leading EMI solutions provider, Laird Technologies provides innovative board and system-level solutions with a wide variety of materials and form factors for high-tech industries and applications around the world.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more