100W & 150W Fanless Medical Power Supplies with 2 MOPP

RECOM Power announces two new series of AC/DC power supplies designed for medical applications: the RACM100 and RACM150. These compact, high efficiency power supplies provide 100W or 135W maximum power in a semi-enclosed case without forced cooling while meeting two means of patient protection, a must for high-grade medical applications. The RACM150 is also available as /F version with fan to deliver up to 150W in the same package.

12V, 15V, 24V and 48VDC single outputs are provided from a universal 85-264VAC input. All models feature efficiencies up to 92%, require no minimum load and can be used at temperatures between -25°C and +80°C. The output voltages are fully regulated and have tolerances of less than ±0.2% over the entire input voltage range and less than ±0.5% over the entire load range. The space saving 3”x2” or 4”x2” modules offer 4KVAC reinforced isolation between input and output, 1.5kVAC between output and case, and also meet the requirements for medical applications with patient contact (2xMOPP, 8mm creepage & clearance, 250VAC working voltage).

The modules are approved to medical safety standard IEC / ES / EN60601-1 3rd Edition and feature B and BF rated outputs with less than 100µA leakage current. All models are compliant with Class B EMI to FCC, EN60601-1-2 and EN55022 standards and offer a 5 year warranty.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more