ICCNexergy Introduces the Industry’s Most Powerful External Power Supply

ICCNexergy, Inc. (ICCN, www.iccnexergy.com), a global leader in the design and manufacture of rechargeable power systems, today announced the launch of its new 220 watt (220W) desktop power supply line at COMPAMED, Hall / Stand 08B N15 in Düsseldorf, Germany. The new 220 watt power supply meets EISA, EuP level V efficiency standards and delivers a full 220W at all DC output voltages compared to current offerings in the market that are limited to 180W in the 12V and 18V DC output voltages.

“Building on the demand from the marketplace, we are proud and excited to be launching our highest performance medical power supply product for the global medical market to date,” said Peter Sadler, ICCNexergy’s Vice President, Europe. “The MWA220 is the most powerful desktop power supply in the industry, purposefully designed for higher power medical applications, and we are pleased to introduce it through the European medical market with all our strategic European resources behind it.”

The MWA220 (approved to 60601) has been designed for use in motorized applications such as hospital beds and orthopedic designs, while the FWA220 (approved to 60950) is ideal for applications with high power requirements such as large displays or large LED systems.

The MWA220 and FWA220 delivers  220 watts of power at 90-264 VAC without derating, while other 220W desktop power supplies require a minimum of 100 VAC to be rated at 220W and may not be able to draw a full 220W in countries like Japan.

The MWA/FWA220 is IPX1 rated, enabling safe use in areas where dripping water, leaks, and spills may occur. All models feature a status indication LED and are backed by an industry-leading, five-year limited warranty.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more