TOUGH WET AREA LOCKERS PROVIDE SAFE & SECURE STORAGE
A new range of Wet Area Lockers that are designed and manufactured to ensure outstanding durability in damp or wet environments, such as swimming pools, changing rooms, saunas, shower rooms, industrial wet areas or food preparation plants, have been introduced by storage specialists STAKRAK LTD.
Unlike other types of wet area lockers these are made using pre-galvanised mild steel and are then powder coated with Germ Guard active anti-bacterial paint. This results in exceptional resistance to scratching which helps to eliminate the potential for rust problems prevalent in wet environments and so ensures optimum health and safety. They also feature strengthened and ventilated doors with rubber buffers and are fitted with a moisture resistant camlock with 2000 different combinations as standard.
The lockers benefit from a robust carcass made from 0.7mm galvanised mild steel and corner uprights using 1.5mm galvanised mild steel with pop rivets. The paint finish involves a three-stage pre-treatment and phosphate coating, one coat epoxy polyester full gloss powder stoved at 180° C which includes the GermGuard antibacterial compound.
They are available in a standard height of 1800mm, standard width of 300mm and depths of either 300mm or 450mm and in range of combinations of; one compartment, 2 doors, 3 doors and 4 doors. Choice of colours includes light grey, blue, red, green, yellow and light blue.
Unlike other types of wet area lockers these are made using pre-galvanised mild steel and are then powder coated with Germ Guard active anti-bacterial paint. This results in exceptional resistance to scratching which helps to eliminate the potential for rust problems prevalent in wet environments and so ensures optimum health and safety. They also feature strengthened and ventilated doors with rubber buffers and are fitted with a moisture resistant camlock with 2000 different combinations as standard.
The lockers benefit from a robust carcass made from 0.7mm galvanised mild steel and corner uprights using 1.5mm galvanised mild steel with pop rivets. The paint finish involves a three-stage pre-treatment and phosphate coating, one coat epoxy polyester full gloss powder stoved at 180° C which includes the GermGuard antibacterial compound.
They are available in a standard height of 1800mm, standard width of 300mm and depths of either 300mm or 450mm and in range of combinations of; one compartment, 2 doors, 3 doors and 4 doors. Choice of colours includes light grey, blue, red, green, yellow and light blue.
Comments