Teledyne Relays Announces New RF332 Relay Series New Product Designed with RF312 Performance and Half the Power Consumption

After the successful release of the RF312 series and field application feedback from system designers all over the world, the RF332 has been designed to exhibit high repeatability and is capable of transmitting signal integrity up to 12 Gbps data rates as well as RF performance over a bandwidth from DC-8GHz. The sensitive RF332 relay has a high resistance coil, thus requiring extremely low operating power.

The RF332 utilizes unique construction features including all resistive welding techniques and specific manufacturing processes that feature excellent resistance to environmental extremes such as shock and vibration that contribute to its overall reliability. The uni-frame motor design exhibits highly magnetic efficiency as well as mechanical rigidity.

Teledyne Relays uses advanced cleaning techniques and gold-plated precious metal alloy contacts to ensure reliable switching and controlled RF insertion loss repeatability. All RF332 relays are hermetically sealed to maintain the inert contact switching atmosphere. The RF332 is designed for use in load-boards, attenuators, RF circuits and signal integrity applications. Its features include high resistance to electrostatic discharge (ESD); various ground pin configurations to improve case grounding and high isolation between control and signal paths.

In addition to the thru-hole mount (RF332 Series), the RF332 is available with J-leads (SRF332 Series), surface-mount stub leads with ground shield (GRF332 Series) and surface-mount J-leads with ground shield (SGRF332 Series). The surface mount ground shield used in the stub lead provides improved high data rate and high frequency performance, as well as improved repeatability. Various ground pin configurations are available Upon request.

The RF332 Series measures .370 inches (9.4 mm) diameter and .400 inches (10.16 mm) in height (excluding leads). It weighs .09 ounces (2.55g).

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more