Reliable, Easy-Care Cooling for Industrial Systems in Europe and Asia

Pentair Technical Products introduces McLean™ brand V-Series indoor air conditioners for reliable, easy-care cooling of industrial systems in Europe and Asia. Its key advantages include a coated condenser coil for filterless operation in most environments, built-in hooks to hang the unit on control panels prior to fastening to make installation easier and an energy-efficient rotary compressor on mid-size models for greater energy efficiency.

Available in 300, 600, 1200, 1500 and 2000 Watt cooling capacities, the new V-Series indoor air conditioner operates on 230 VAC 50 Hz power input. It is CE certified for countries outside the U.S. and carries the GOST certificate for Russia.

“We are excited to bring the McLean brand V-Series air conditioner to the European and Asian markets,” said Paul Landgraf, Global Category Director for Electronics Cooling at Pentair. “As the world becomes more industrialized with factory robotics and other process control automation, customers want to keep their operations running smoothly and reduce the time to maintain their equipment. Pentair is stepping up with the new V-Series indoor air conditioner to meet this growing trend.”

The V-Series indoor air conditioner provides more cooling at high 55 C ambient temperatures than other brands. It is made with a rugged all-metal exterior for demanding factory conditions and comes with a reliable mechanical thermostat to reduce the chance of failure. Exterior surface mounting and RAL 7035 light gray paint are standard for the V-Series air conditioner, though other options are available.

A worldwide network of 1000+ repair technicians and regional inventories of spare parts are globally in place to keep the V-Series air conditioner and other McLean Cooling Technology products up and running, minimizing downtime for customers.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more