New Xilinx Kintex-7 FPGA Connectivity Kit Dramatically Increases Productivity for Designing High Bandwidth Applications

Xilinx Inc. (NASDAQ: XLNX) today announced the availability of the Kintex™-7 FPGA Connectivity Kit for customers creating advanced serial I/O designs across a broad range of high bandwidth applications. The Kintex-7 FPGA Connectivity Kit dramatically increases designer productivity by including a fully validated and supported reference design that integrates an entire PCIe® solution with DDR3 sub-system, including both the HDL and the complete software stack.

"The Kintex-7 FPGA Connectivity Kit helps increase our customers' productivity by offering a Targeted Reference Design that removes much of the tedious work customers would otherwise have to do on their own. They can focus on what they do best – building and optimizing their own applications," said Raj Seelam, director of marketing at Xilinx. "This highly optimized reference design can be used in production systems or as a proven base for custom modifications which significantly improves our customers' time-to-market."

The Kintex-7 FPGA Connectivity Kit provides a comprehensive, out-of-the box design environment that includes a 20 Gb/s Targeted Reference Design (TRD) to jump-start application development. The reference design integrates the Kintex-7 device's 12.5 Gb/s GTX transceivers and PCIe x8 Gen2 hard block with a high-performance 10G DMA IP core from Northwest Logic, dual 10G Ethernet links using 10GBASE-R PHY interface, a virtual FIFO memory controller interfacing to an external DDR3 memory and supports the AMBA® AXI4 (Advanced eXtensible Interface 4) standard. 

The reference design provides designers with a high-performance solution for high bandwidth applications such as wired telecommunications and wireless infrastructure, audio, video, and broadcast solutions; high-end consumer markets; aerospace and defense (A&D) and high-performance computing storage applications. Also provided are the software drivers, driver source code and a GUI to enable users to control and evaluate the design more quickly.

The kit itself includes a Kintex-7 FPGA KC705 base board with a high-speed FMC daughter card from Faster Technology that allows up to four 10 Gb/s SFP+ interfaces, two of which are leveraged in the TRD to give developers a real-world example to reference for their next high-speed serial I/O designs.

The 28nm Kintex-7 family is designed for maximum power efficiency and delivers a 2x price-performance improvement while consuming 50 percent less power compared to the previous generation of FPGAs. Kintex-7 FPGAs offer high-density logic and up to 32 GTX high-performance transceivers with a maximum performance up to 12.5 Gb/s and a peak serial bandwidth of 800 Gb/s.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more