Ideal Industries Networks Hosts a Free CEDIA Webinar for Business and IT Professionals

Gigabit + Infrastructure: Building the Future with Fiber Optic and CAT6a Cabling

WHAT: Ideal and CEDIA are sponsoring a free webinar: Gigabit+ Infrastructure: Building the future with Fiber Optic and CAT6a Cabling.

WHEN: Thursday, July 19th, 2012, 1:00PM - 2:00 PM EDT

WHY: With the continued convergence of the consumer electronics and IT/Networking industries, almost every product in the marketplace comes equipped with a network jack, and streaming media apps can be found on virtually any video or audio source device. As the number of the devices and services that live on the home network continues to increase exponentially, the competition for bandwidth has become a serious concern. It is critical for integrators to re-evaluate current infrastructure offerings and look to solutions that will allow for future growth as well as higher levels of reliability and performance.

By attending this webinar, participants will gain valuable insights and knowledge around new infrastructure options including CAT6a and fiber optic cabling. The benefits and performance characteristics will be discussed as well as limitations and pitfalls to avoid when specifying these advanced infrastructure technologies.

WHO: Headquartered in San Diego, CA, IDEAL INDUSTRIES NETWORKS is an innovative manufacturer of Hand Held Network Testers deployed in LAN Installation, LAN Management and WAN Access. Products include LanTEK™ cable certifiers, LanXPLORER™ network analyzers, SIGNALTEK™ network qualifier, SecuriTEST™ CCTV testers, and NaviTEK® II network certifier.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more