Fluke Networks Announces First Auto Multi-Segment Analysis Capability For Both Portable and Rack Mount 40 Gbps Stream-to-Disk Solutions – Speeds Troubleshooting by Factor of Five

Fluke Networks today announced a new version of Network Time MachineTM (NTM), the first packet analysis appliance that provides automated multi-segment analysis (Auto MSA) capability for both portable and rack mount solutions for up to 40 Gbps network traffic. Network professionals will now have the flexibility to use both rack mount and portable versions, or even the Fluke Networks OptiView® XG Network Analysis Tablet, to gather packet information across multiple tiers within the data center or a distributed network. This delivers a complete view of the transaction process and isolates points of failure nearly five times faster than competing solutions.1

By 2015, server unit growth with 40 Gbps Ethernet interface is expected to grow by more than 40 percent, which represents new challenges isolating packet delays and losses across different network segments.2 “Both our enterprise and carrier customers need to be able to troubleshoot high speed links whether they are in the data center or out in the field,” said Mitsuru Onodera, executive officer for information and communication technologies at Toyo Corporation. “Solutions like the new version of Network Time Machine are key in helping enhance troubleshooting wherever it’s needed.”

“The investments our customers are making in 40 Gbps pipelines are tremendous, and they need to ensure they’re maximizing the investment,” said Daryle DeBalski, vice president and general manager of Fluke Networks. “The newest version of Network Time Machine demonstrates our continued commitment to keeping pace with the technologies our customers are using and helping them drive value and performance from their infrastructure.”

The new version of Network Time Machine can capture 20 Gbps stream-to-disk (Tolly Group Certified3) and the portable version can capture 10 Gbps stream-to-disk, and will be available in September. For more information, please visit Fluke Networks.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more