±25 ppm XpressO Oscillators from Fox Electronics Operate Over Wide Temperature Range

Fox Electronics, a leading global supplier of frequency control solutions, now offers its XpressO XO oscillators with an extremely tight frequency stability to ±25 ppm over the operating temperature range of -20°C to +70°C in a miniature 3.2 mm x 2.5 mm package. The new HCMOS 3.3 V FXO-HC336 is part of Fox's full line of low-cost, high performance XpressO oscillators that are delivered within 10 days and offer extremely low jitter.

Fox's new oscillator is ideal for use in a variety of applications, including microprocessor, DSP, FPGA, SONET and Ethernet environments as well as industrial controllers, test and measurement equipment, storage area networks and other applications that require the oscillator to maintain its frequency over a wide temperature range in a compact, cost-effective package.

The RoHS- and REACH-compliant FXO-HC33 family of crystal oscillators are available in any frequency from 0.75 MHz to 250 MHz and offer a frequency resolution to six decimal places. Additional options are also available for the FXO-HC33 product family.

A breakthrough in configurable frequency control solutions, XpressO crystal oscillators utilize a family of proprietary application specific integrated circuits (ASICs), designed and developed by Fox with a focus on noise reduction. These ASICs have the ability to enable users to select the optimum combination of output type, input voltages and temperature performance features.

The oscillators feature a tri-state enable/disable feature that allows the user to turn off the output as a way to reduce power consumption. The contacts of the FXO-HC33 series contacts are constructed with a gold over nickel termination finish and incorporate industry standard packaging, including footprint and pin-out.

XpressO oscillators have reduced noise levels comparable to traditional bulk quartz and SAW oscillators by using the third order Delta Sigma Modulator (DSM). The low cost oscillators also offer extremely low jitter of less than 1 pS.

Samples are available in one to two days, with production quantities within ten working days. The oscillators come standard with Fox's patented serial identification system that ensures exceptional quality control and unique traceability of each individual part throughout the entire manufacturing process.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more