PEI-Genesis Is Now Configuring Power Supplies From Emerson Network Power

PEI-Genesis, Inc., one of the world’s fastest integrators of configurable and modified standard power supplies, is now UL-certified and holding inventory to add value to power supply solutions from Emerson Network Power, a business of Emerson and the global leader in enabling Business-Critical Continuity™.

A broad range of Emerson Network Power standard products, including medical and industrial grade configurable power supplies, are available for modification. The addition of this line expands PEI-Genesis’ standard offering for power products to 4920 watts. All modified standard power products are assembled within PEI’s usual five-day turnaround, which is substantially quicker than typical industry lead times. As always, no minimum order quantities are required.

“PEI-Genesis is focused on delivering highly-tailored solutions quickly, and with superior engineering support,” said Russel Dorwart, president and COO, PEI-Genesis. “We have passed UL certification and are fully stocked to assemble Emerson Network Power products for design engineers in North America and Europe. We believe that our speed and technical expertise combined with Emerson’s broad range of configurable power options will give our customers vast choice with immediate satisfaction.”

“As a distribution partner, PEI-Genesis provides us with an exceptional channel to deliver our products. Their no minimum quantity policy means that R&D engineers can get Emerson Network Power products modified to their exact specifications in just five days, and order only one piece, if that’s all they need,” said Greg White, Vice President of Worldwide Sales, Embedded Power, Emerson Network Power. “We view this capability as a terrific competitive edge for us.”

PEI’s team of dedicated power design engineers are available to assist with the most complex design challenges.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more