STEMMER IMAGING To Distribute Vieworks Machine Vision Cameras In Europe

Offering a complete line up of machine vision cameras using CMOSIS and Kodak sensors on CameraLink and CoaXPress interfaces, STEMMER IMAGING is pleased to announce that South Korean supplier Vieworks products are now available in Europe completing our offering in this product sector.

Since its foundation in 1999, Vieworks has developed structural technologies such as industrial optics, mechanics, electronics and software and has improved their integration for more creative optoelectronic industrial imaging solutions. The company´s industrial cameras provide advanced digital cameras built around state-​of-​the-​art CCD and CMOS sensors, including the full line of CMOSIS and Kodak sensors with up to 29 Megapixel resolution. Nano stage pixel shift machine vision cameras with resolutions of up to 260 Megapixel and thermoelectric cooled industrial vision cameras for flat panel display inspection and scientific applications are also part of Viework´s offering.

By signing this agreement, Vieworks´s CameraLink and CoaXPress lines of industrial cameras are available from STEMMER IMAGING in all countries served by Europe´s largest imaging technology provider.

Mark Williamson, Director - Corporate Market Development at STEMMER IMAGING, said: "We are delighted to complete our portfolio of Kodak and CMOSIS based machine vision cameras with Vieworks's high speed CameraLink and CoaXPress industrial vision cameras. Tests by our technical staff have proven the excellent quality of these industrial cameras and we are excited by the new solutions that can be realized for our customers based on Vieworks machine vision cameras."

Hooshik Kim, CEO - Vieworks Co. Ltd., said: "Europe as one of the biggest Industrial Camera market in the globe has always been our principal target. Now we are excited to be able to provide our products, especially through STEMMER IMAGING, a more than qualified partner."

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more