First-of-Its Kind Mobile Sensor Technology Revolutionizes Road Maintenance Industry

For the first time, road maintenance departments now have the ability to access weather data from their entire networks of roads with mobile sensor technology developed by Vaisala, a global leader in environmental management.

To coincide with the announcement of its Condition Patrol technology, the company is launching Vaisala Across America, a cross-country tour to start February 1 from the company's U.S. headquarters in Louisville, Colorado. The tour will visit more than 40 cities over 16 weeks.

"Vaisala is excited to offer this first-of-its-kind mobile data collection system for our road customers in cities, counties and departments of transportation around the country. We look forward to giving our U.S. customers and the public a unique, hands-on experience with the product during the Vaisala Across America tour," said Antero Jarvinen, Director of Vaisala's Road and Rail Market Segment.

Vaisala developed Condition Patrol in response to industry demands for mobile solutions. The system allows road maintenance crews to gather pavement temperature, air temperature, road conditions, and road friction levels from across their entire network of roads. The data is collected using laser and infrared observations from sensors mounted on maintenance vehicles as opposed to fixed spots along authorities' road networks. The real-time data is then downloaded to a software program that provides recommendations to the maintenance supervisor about road treatment options, allowing them to make more informed decisions - which in turn reduces costs and improves road safety for all drivers.

Comments

Post a Comment

Popular posts from this blog

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more