MediSpec™ Hybrid Circular MT Connectors and Receptacles from Molex Provide a Streamlined Solution Ideal for Medical Systems

Molex Incorporated introduced today the MediSpec™ Hybrid Circular MT Cable and Receptacle System, an integrated optical and electrical solution that reduces the number of connectors required in medical equipment and devices. The multifunctional connector uses Molex’s circular MT optical connector and receptacle technology, providing three configurable MT ferrule compatible ports for a combination of copper or fiber media carrying electrical power, low speed copper signaling, optical data or video signals. This integrated technology may be incorporated into a custom solution to meet an end user’s specific requirements.

The MediSpec Hybrid Circular MT system, which will be on display at MD&M West, February 14-6, Anaheim, CA, booth 2074, offers a more streamlined approach to medical system design and is ideal for a variety of applications including robotic surgery, neurosurgery, orthopedic surgery, diagnostic imaging, optical coherence tomography, guidance/illumination/navigation, interventional energy lasers and Picture Archival Communications.

“Medical equipment manufacturers are being driven to develop more advanced optical and electrical interconnects, while at the same time reducing complexity for the end user and minimizing costs,” said Eve Leal, program manager, Molex. “By combining both the optical ferrules and electrical contacts in one interface, the MediSpec Hybrid Circular MT system streamlines the number of connectors a customer needs to deploy, helping simplify installation, increase aesthetics and reduce costs.

For the PC board or equipment side, the MediSpec Hybrid Circular MT system offers various options of Molex connectors, including optical MT, LC and SC along with electrical connectors such as Micro-Fit 3.0™, MicroClasp™ and various RJ-45 jacks.

Other features that make the MediSpec Hybrid Circular MT Connectors and Receptacles well-suited for medical systems include:

  • Metal and medical-grade polymer connector housing options: Metal housing provides a robust connector to withstand harsh environments and offers EMI shielding, while the polymer housing is lightweight and ideal for sensitive applications, including MRI and PET scans.
  • Expanded beam MT ferrule option: Helps reduce optical loss due to contamination, protects fibers from debris, scratching, pitting and provides long-term connection reliability, a critical requirement of medical equipment.
  • Fiber counts range from 1 to 24 fibers per ferrule: Accommodates multimode expanded beam 12-fiber ferrules and/or traditional multimode and singlemode MT ferrules for a variety of signaling, sensing or power carrying applications used in medical fiber optic-based products and technologies.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more