The Convenient C-Mount – VeriSens® Vision Sensors with Integrated Flash Controller and up to 2 MP Resolution

The new VeriSens® XC series of vision sensors from Baumer are the first devices in this category featuring a fully integrated flash controller and resolutions of up to 2 megapixels.
  •     Fully integrated flash controller for external illumination
  •     Rapid system integration while offering full flexibility
  •     Resolution up to 2 megapixels
  •     360° FEXLoc part location
  •     Up to 100 checks per second
These two advantages combined, provide extremely simple integration and flexible system solutions. The C-Mount design introduces complete freedom of lens selection – even for complex applications. At the same time, the integrated flash controller significantly reduces the cost of typically employed external light solutions. External lighting can be flashed with up to 48 V and 4 A while its configuration is already included in the intuitive software of the VeriSens®. This combination gives the user more time to implement his application solution and completely abolishes the need for familiarization with the programming of an external flash controller.

CCD sensors with three different resolutions – ranging from VGA to 2 megapixels – will be available with the VeriSens® XC series. An extensive software update will also be supplied to support the system’s multiple range of functions. New options, such as an extended statistical assessment are added to the functions already familiar from previous VeriSens® series. The integrated test environment for listed jobs allows the setup to be verified and documented more comprehensively before production is started. The integrated FTP functionality simplifies image storage on external media and new tools for distance determination add further possibilities for a complete production control.

Comments

Post a Comment

Popular posts from this blog

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more