RSP-750 Series (750W 1U Low Profile Enclosed Type Power Supply)

After the launch of RSP-1000 and RSP-2000 series, MEAN WELL further introduced another 750W 1U low profile enclosed type switching power supply ~ RSP-750 series, which makes the AC/DC miniature enclosed industrial product line more complete. RSP-750 series have 42% smaller in size compare to the current models of SP-750 (750W). Featuring with 9.44W/in3 of high power density, the new power units are very suitable for the industrial equipments which have limited space for installation. With the wide range trimming function, both output voltage and output current can be adjusted from 40% to 110% rated output voltage by adding 2~5.5VDC of external control voltage, which provide users great flexibility for their system design. Because of this, they can be used in the charging systems or burn-in equipments that require wide range adjustment of output voltage and output current.

With up-to- date circuit topology, RSP-750 series equip with PFC function and possess up to 92% of high efficiency, so it can be cooled by the built-in long life DC fan from -30℃ to +50℃ ambient temperature under full load condition, and even up to +70℃ by suitable derating. Other built-in functions include remote sense, remote ON/OFF control, 12V/0.1A auxiliary output, and DC OK alarm signal output (TTL signal). All series comply with UL, CUL, TUV, CB and CE regulations that can greatly guarantee your safety. Applications include general industrial control system, IC testing equipment, instrumentation, telecom, data storage, laser-carving machine, and charging system and etc. that requires high rating of wattage supply.   
  •     41mm low profile design for 1U installation
  •     AC input range 90~264V
  •     Built-in active PFC function
  •     High efficiency up to 92%
  •     Output voltage can be trimmed between 40~110% rated value by adding 2~5.5VDC of external control voltage
  •     Output current can be trimmed between 40~110% rated value by adding 2~5.5VDC of external control voltage
  •     Remote ON/OFF control and remote sense
  •     12V/0.1A auxiliary output
  •     DC OK signal output (TTL signal)
  •     Forced air cooling by built-in DC fan with fan speed control function
  •     Protection: Short circuit / Overload / Over voltage / Over temperature / Fan alarm
  •     Certificates: UL / CUL / TUV / CB / CE
  •     Dimension(LxWxH): 250x 127x 41mm
  •     3 years warranty

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more