Skip to main content

Building Better M2M Devices Through Antenna Optimization

The process of building a better M2M (machine-to-machine) device - one that not only fits the application scenario but also performs well in the field - starts with choosing the right antenna.

Selecting the right antennas for a device, particularly cellular antennas, and testing and integrating them properly, can prove the difference between a device that passes network certification and testing like PCS-1900 Type Certification Review Board (PTCRB) testing, and one that does not. Good radio frequency (RF) optimization and OTA (over the air) performance in wireless devices is critical for these certifications, and incorrect antenna selection and integration can often be blamed when M2M devices fail certification testing. Often, it is a system issue, such as the overall design of the system or how that device is interacting. As with many things, system optimization is the key to success.

This article discusses the important process of antenna selection, how to incorporate antennas in M2M devices and the recipe for connectivity success. First, let's take a look at selecting the proper antenna.

Antenna Selection
Better antennas mean better devices. It’s as simple as that. Understanding the requirements for achieving specific network certification processes are the most important factors when first selecting a cellular antenna. Once the module provider and the carrier have been selected, the next part of the process should be selecting the right antenna for your application.

The first step is for the device maker and antenna company to partner from the start to incorporate their ideas for compliance and RF performance.

The second phase involves the device maker and antenna company cooperating on product design files to work out the advantages and disadvantages of each antenna configuration.

Once the antenna is selected, the customer can start to make prototypes of the device incorporating the required configuration for the recommended antenna. Depending on whether it is a custom design or not, the antenna partner either provides the device maker with a current production sample (off the shelf) or a handmade antenna for the prototype device that enables the device maker to finish their product design. When the product is finished and can connect to a network, the device maker sends the final device to the antenna partner.

Next is the stage where active device optimization happens – this means the ability to increase the device send and receive sensitivity to improve transmissions. When devices are optimized it results in superior M2M devices. The process is what cell phone companies do in their own laboratories before sending devices to final certification. M2M companies in most cases do not have the resources to do that on their own, and they are required to choose antenna partners who can do it for them.

Selecting the right antenna can streamline the whole product design process and result in M2M devices passing certification testing the first time. In general, M2M systems are getting smaller to satisfy scenarios such as body-worn medical devices. Yet, the same device has to get excellent performance and will be compared to a cellphone. When devices are smaller, performance can be compromised, but using an antenna optimized for greater send and receive sensitivity can help compensate for size.

Comments

Popular posts from this blog

TURCK M8 CORDSETS WITH 100 PERCENT SHIELDING OPTION PROTECT AGAINST EMI/RFI

TURCK is now offering the option to completely shield M8 picofast ® cordsets by connecting a braided shield directly to the coupling nut. This provides a cost-effective and reliable connection with 100 percent cable and connector shielding, which protects against electromagnetic and radio frequency interference.

The 3 and 4-pin cordsets are available with flexlife ® PVC or PUR jacketed cable. All connectors deliver IEC IP 67 protection.

The M8 picofast line, like most TURCK cordsets, provides male or female, straight and right angle connectors, standard and custom lengths, and pigtails or extensions. Fully encapsulated mating receptacles are also offered, completing the system.

Banner Engineering DF-G3 Discrete Fiber Amplifier Features World-Class Long Range Sensing Capability

Banner Engineering introduces its DF-G3 discrete long-range fiber amplifier with dual digital displays for use with plastic and glass fiber optic assemblies. Featuring increased sensing power, the DF-G3 can sense more than 3 meters (10 ft.) with opposed mode fibers or more than 1 meter (3 ft.) with diffuse mode fibers. The extra power provides increased detection reliability for dark targets at long range and enhanced detection sensitivity when using specialty fiber assemblies for large area and small part detection applications.

The DF-G3 is available with a single discrete output or two dual discrete outputs. The dual discrete outputs can be independently taught to trigger at different intensity values, which is ideal for correct part-in-place or error-proofing, bottle down, and edge guiding applications.

“We developed the DF-G3 fiber amplifier to meet our customers’ need to precisely detect smaller targets at longer ranges” said Dennis Smith, Senior Marketing Manager, Banner Engin…

TURCK’s BL Compact Family Collects Analog and Digital Signals at the Source

TURCK’s BL Compact system is a revolutionary modular I/O solution for collecting a variety of signals in a single, rugged node on a network. Rather than routing all signals through a control cabinet, this device makes it possible to obtain analog, digital, thermocouple, RTD, serial, RFID or a mixture of signal types in a compact, machine-mountable device over DeviceNet™, CANopen and PROFIBUS ®.

Up to two signals types can be combined in any combination in the BL Compact system, including RFID and analog, digital and serial—and more. The BL Compact system may be customized to suit a user’s specific needs, so that devices may be added to an existing network and signals may be gathered on the machine without an enclosure. This drop-in solution can be used to connect up to 16 devices—drastically reducing the time it takes to run wires for each device back to the control cabinet and the potential for wiring errors.

The BL Compact system is currently available with four, eight or 16 ports i…