Projects Unlimited, Inc. Announces .01005 Electronic Component Placement Capability

Projects Unlimited, Inc., Dayton, Ohio, announced today that it has implemented the technology & perfected the capability to place .01005 mm. electronic chip components. This capability comes at a crucial time in electronic manufacturing as Robotics, UAV’s & other modern military & aerospace platforms look to decrease weight & size for cost savings while maintaining reliability. Projects Unlimited, Inc. has been placing .0201 components, which are about the size of a grain of pepper for several years. The .01005 components are smaller & difficult to see with an unaided eye. We will begin production on printed circuit boards requiring .01005 later this summer.

Brenda Ramos, Vice President of Sales & Marketing for Aerospace and Electronics, announced that this was one of the highlights of the year for Projects Unlimited and the company is very excited to have the opportunity to offer this capability to our customers. Further, it demonstrates PUI’s commitment to continuous improvement & obtaining the most up to date capabilities in electronic manufacturing.

Projects Unlimited Inc., Dayton, Ohio, is an AS-9100 registered electronics contract manufacturer servicing the aerospace & military industry for nearly 60+ years. The Aerospace & Electronics Company employs approximately 170 people and has a state of the art 74,500 square foot manufacturing facility.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more