Helicomm 2008 New Product Release Seminar

Helicomm, Inc., a leading wireless networking solutions provider, held new product release seminars in Beijing and Shanghai, China.

In its 7th year, Helicomm presented new product line and industry solutions in addition to the extension of devices within presently existing categories. Present at the event were over 200 of Helicomm's important partners and customers, for which presentations an demonstrations were given on the new releases of Helicomm's embedded and packaged wireless devices.

The important new products presented at the seminar were the IP-Link 122X series modules, IP-Link 2200 series ZigBee terminals, IP-Link 5500/5100 wireless location tracking tags and readers. The function and application of these products were shown the latest IEEE802.15.4 and ZigBee technology to engineers and professionals in wireless communication industry.

The application demonstrations of Indoor Air Quality Wireless Sensor Network? Underground Miner Location Tracking System? Wireless Appliance Control System?and Streetlight Monitoring Systems?gave attendants a vivid demo on the reliability and functionality of ZigBee/GPRS short/long distance wireless solution.

Helicomm's Asia Sales Director, Michael Li, at the seminar expressed his view of wireless communication market and shared the idea that Helicomm will continue to expand its development efforts into new related application areas. In response to the market competitive demands, Helicomm will continue to release new wireless devices with competitive advantages.

In additional Helicomm personnel, were staff from Helicomm partner company as well as other guests. FrameView, Helicomm's strategic partner introduced the FrameView software, a tool for Helicomm's ZigBee/GPRS products, which had been widely used in environment, irrigation and energy control areas. The alliance enabled Helicomm to combine the ZigBee-certified products with FrameView's flexible software, resulted in more reliable, broader functional products.

This new product release seminar could certainly be viewed as a successful event, with numbers of enthusiastic attendees and successful demos. Helicomm will bring more new ZigBee products and applications in the future, and will elevate your business to a step further.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more