360 Outshines the Competition at NeoCon® 2012

Luxo’s 360 LED task light was honored with Contract magazine’s Best of NeoCon® Gold award at NeoCon World’s Trade Fair 2012.

Luxo’s 360 is a fully-adjustable LED task light with an extended arm reach and minimal footprint. It best articulates its ergonomics with a revolutionary arm that moves in unison with its rotating base allowing for the most ergonomically correct workspace lighting by directing light exactly where needed for optimal lighting and functionality.

The Stephan’s Copeland designed 360 continues Luxo’s long-standing history of sophisticated design and uncompromising quality. 6.5W of high-power dimmable LEDs provide unequaled illumination and produce 105 footcandles at a height of 16 inches above the worksurface. Backed by a comprehensive 5-year warranty, including LEDs, the 360 is guaranteed to deliver 45,000 hours of continuous use.

360 delivers maximum light coverage while occupying minimal workspace. 360 is adaptable anywhere that high-performance energy-efficiency and adjustability are sought. In addition to full dimmability, the 360 features auto timeout which delivers 9 hours of uninterrupted use and then shuts-off the lamp to eliminate unnecessary energy drain With its asymmetric distribution, 360 casts light horizontally across the worksurface optimizing the ergonomic lighting and preventing glare.

Now in its 23rd year, Best of NeoCon® recognizes outstanding new products across 42 categories within commercial interiors. 325 products are reviewed by 46 interior designers, architects, and facilities management professionals and awards are presented by Contract magazine.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more