Ultra High Speed (1Bfps) Multi-Spectral Camera

Specialised Imaging has recently supplied their renowned SIM-D Ultra Fast Framing Camera in a new multi-spectral imaging configuration. The versatile SIM-D has the capability of fitting up to 16 individual filters with wavelength from 400nm to 850nm within the optical system. This facility, coupled with the ability to take images at exposures down to 3ns with zero interframe time. enables the accurate study of wavelength dispersion when materials are stressed, the measurement of temperature, and colorimetry.

The SIM-D from Specialised Imaging has been designed as a no-compromise entry-level ultra fast framing camera system that uniquely combines ease of use, ease of maintenance, compactness and high performance.
Unlike other entry level ultra fast framing cameras the optical design of the SIM-D provides the choice of up to 16 separate optical channels without compromising performance or image quality. Effects such as parallax and shading, inherent in other designs, are eliminated and the high spatial resolution (> 36 lp/mm) is the same from frame to frame and in both axes. Individual ultra-high resolution intensified CCD detectors, controlled by state-of-the-art electronics, offer almost infinite control over gain and exposure allowing researchers total freedom to capture images of even the most difficult transient phenomena. 

The intuitive design of the SIM-D allows even occasional users to achieve top quality results. A novel optical periscope for focus adjustment enables rapid and simple experimental setup and optimisation. Comprehensive triggering facilities, highly accurate timing control, and a wide range of output signals, coupled with a software package that includes full measurement and image enhancement functions simplifies image capture. Full remote operation using Ethernet connectivity comes as standard enabling the SIM-D to be easily integrated into almost any environment.

Sharing many common features with Specialised Imaging's performance benchmark setting SIM range of cameras, the SIM-D Ultra Fast Framing camera is perfectly suited for applications in fields as diverse as automotive testing, biomedical research, combustion research, failure dynamics, impact studies, nanotechnology and university research.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more