Two New HMIs added to the GOT1000 Series

Mitsubishi Electric Automation, Inc. introduces two new Human Machine Interfaces (HMI) to its GOT1000 line-up. The first unit is the GT16 Handy (GT1665HS-VTBD), a 6.5-inch pendant-style HMI display that is designed for machine builders and manufacturers seeking a flexible, mobile HMI solution. The second terminal, is a traditional 5.7-inch panel-mount HMI display that is designed for end-user facilities and machine builders who need a compact interface. Take a look at these new models and explore Mitsubishi's entire lineup of HMI products that offer more than just visualization.

The GT16 Series is Mitsubishi's new flagship Graphic Operation Terminal (GOT).  Models in this range offer a comprehensive feature set in an integrated HMI hardware package. Ideal for any standalone or networked solutions, the GT16 easily delivers visualization for machine, factory and enterprise level applications. Unmatched in performance, the GT16 integrates both multimedia and HMI functionality in a single platform to rival the traditional PC. Unique to GT16 and GT15 Series are an assortment of embedded maintenance functions to improve uptime and operations. Terminals range from 15 inch down to 8.4 inch and are available in a wide range of resolutions (XGA, SVGA and VGA).

Common hardware features for the GT16 include an enhanced CPU and graphics engine, integrated communication ports (RS232/RS422/Ethernet) and power supply, front mounted dual USB ports (USB host/device), compact flash and options slots and 15MB of onboard flash memory as standard.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more