C&K Extends Life Cycle of Smart Card Connector Series for Demanding Smart Meter Applications

C&K Components, a global manufacturer of pushbutton, tactile, toggle and rocker switches, as well as smart card interconnect devices, has developed the CCM03 Series of smart card connectors for smart meter applications. These new devices are compatible with SIM/SAM cards and are available in hinged or fixed cover designs, as well as pick-and-place and lead-free SMT soldering compatibility. With a vibration frequency rating of 10 to 500Hz, a mechanical life of up to 50,000 cycles in fixed cover configurations, and 10,000 cycles for hinged cover variants, the CCM03 Series connectors are well suited for smart meter applications.  Available in either six- or eight-contact variations, the CCM03 Series smart card connectors feature a spoon design that maximizes contact area. The CCM03-3001 features an inlay deposit on the contact area, while the CCM03-3754 and 3013 models contain gold-plated contacts and detectable switch/blade functionality.

“The CCM03 Series satisfies all the design and application requirements of the smart meter industry, among many other markets where quality of detection is key,” said Jean-Michel Bourin, business development director for C&K Components. “These rugged smart card connectors are easily integrated, offer extended lifespans, and deliver high performance. The different configurations offered in the CCM03 Series also make it an ideal option for identification, point-of-sale, automotive, and handheld product applications.”

The RoHS-compliant CCM03 Series has an operating temperature range of -40ºC to +85ºC, ideal for smart meter applications that require rugged and reliable connectors.

The CCM03 Series connector expands C&K’s broad product offering of smart meter components.  C&K’s extensive switch offering for smart meters includes the sealed KSC Series and KSE Series tactile switches, IP40-rated KSU Series, miniature RTE Series and ultra-miniature RTE Series.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more