EVERLIGHT Introduces the Brand New Shwo D LED Lighting Series

Expanding EVERLIGHT’s Lighting Series component portfolio, EVERLIGHT Electronics [TSE:2393], one of the world’s leading company in LED Lightingintroduces a brand new high power, high brightness LED package, the “Shwo D” Series – our new powerful, bright and economic (superb $/lm) LED series in a compact ceramic package.

The Shwo D series is a surface-mount high-power device featuring high brightness combined with a compact size (3.5x3.5x0.58mm) that is suitable for all kinds of lighting applications such as general illumination, flash, spot, signal, industrial and commercial lighting. With standard operating current of 350mA, the Shwo D family can be driven at 1 watt. The minimum luminous flux (lm) of the 1W Shwo D can be up to 110 lm at 6500K(CCT) or 80 lm at 3000K(CCT) when driven at 350mA of current.

The thermal pad of this device is electrically isolated providing convenience in thermal and electrical design. The Shwo D series also has the advantage of low thermal resistance. It is one of the most promising devices in EVERLIGHT’s high power Lighting Series product offering and is ready to face the challenges of today’s Solid-State Lighting requirements.

EVERLIGHT is also promoting closer working relationships between our R&D, Sales and Marketing teams to better meet and exceed our customer’s expectations in both product offering and technology perspectives. The Shwo D LED series and its many technical features are a result of fostering a closer relationship between these teams.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more