Skip to main content

Emerson Network Power LPS109-M 100-150 Watt AC-DC Power Supply Features Power-over-Ethernet Output Isolation

Emerson Network Power, a business of Emerson (NYSE: EMR) and the global leader in enabling Business-Critical Continuity™, today announced a high efficiency 100-150 watt ac-dc power supply that can be used for Power-over-Ethernet (PoE) applications. The new LPS109-M power supply is ideal for powering PoE-enabled networking devices such as Ethernet switches or applying a dc voltage to CAT5 cable for powering remote devices such as IP security cameras, WLAN access points, VoIP phones and other PoE-compatible products.

The main output of the Emerson Network Power LPS109-M meets the electrical isolation requirements of the IEEE 802.3at-2009 PoE standard. The power supply also carries both information technology equipment (ITE) and non-patient contact and non-patient critical medical safety approvals, making it suitable for a diverse range of low power applications.

Packaged as a very compact open-frame unit, the LPS109-M has a footprint of just 2 x 4 inches (50.8 x 101.6 mm) and a height of only 1.29 inches (33 mm). It has a typical full load efficiency of 88 percent and a power density in excess of 14 watts per cubic inch (0.88 watts per cubic centimeter). These attributes mean that the power supply can easily be accommodated in narrow (1U high) rack-mount and low-profile equipment.  There is also an optional metal safety enclosure kit (LPX50) available.

The LPS109-M has a universal 90-264 Vac input, enabling it to be used almost anywhere in the world without adjustment, and is also capable of operating from a 120-300 Vdc input. The power supply produces a main output of 54 Vdc, rated at 1.85 A continuous with normal connection cooling, which can be up rated to 2.8A with forced air cooling. It also produces an isolated 12 Vdc fan output, rated at 1 A. The main output is regulated to within plus/minus two percent, and can be adjusted over the range 48.6 to 59.4 Vdc. Remote sense is provided to compensate for a drop of up to 0.5 V between the main output connector and the load; the power supply will operate without remote sense connected.

Active power factor correction is employed to minimize input harmonic current distortion and ensure compliance with the international EN61000-3-2 standard. The power supply has a maximum safety-ground leakage current of 275 μA, and the main output has a hold-up time of 10 millisecond minimum when delivering its full 150 watts of output power.

Emerson Network Power LPS109-M power supplies are comprehensively protected against overvoltage, over temperature and short-circuit conditions, and feature a ‘power fail’ signal for remote monitoring purposes which will change state at least 6 milliseconds before the main output loses regulation. The power supplies have a full-load ambient operating temperature range of 0 to +50 degrees Celsius without derating, can operate up to 70 degrees Celsius with derating, and can cold-start from as low as -20 degrees Celsius.

LPS109-M ac-dc power supplies comply with the rigorous EN55022-B and FCC part 15 Level B EMC standards for conducted noise and meet all applicable immunity standards, including EN61000-4-2, -3, -4, -5, -6, -8 and -11. The power supplies carry a wide set of safety approvals, including TUV/UL/cULus/CB/CQC 60950/60601-1 and CE Mark (LVD).

Emerson Network Power’s LPS109-M power supplies have a mean time between failure (MTBF) of 534,000 hours (calculated in accordance with Bellcore standards), running at full load and 25 degrees Celsius ambient, and are backed by a comprehensive two year warranty. The supplies are available for immediate delivery, and standard lead time is stock to eight weeks.

Comments

Popular posts from this blog

Banner Engineering DF-G3 Discrete Fiber Amplifier Features World-Class Long Range Sensing Capability

Banner Engineering introduces its DF-G3 discrete long-range fiber amplifier with dual digital displays for use with plastic and glass fiber optic assemblies. Featuring increased sensing power, the DF-G3 can sense more than 3 meters (10 ft.) with opposed mode fibers or more than 1 meter (3 ft.) with diffuse mode fibers. The extra power provides increased detection reliability for dark targets at long range and enhanced detection sensitivity when using specialty fiber assemblies for large area and small part detection applications. The DF-G3 is available with a single discrete output or two dual discrete outputs. The dual discrete outputs can be independently taught to trigger at different intensity values, which is ideal for correct part-in-place or error-proofing, bottle down, and edge guiding applications. “We developed the DF-G3 fiber amplifier to meet our customers’ need to precisely detect smaller targets at longer ranges” said Dennis Smith, Senior Marketing Manager, Banner E

IDEC Releases New Line of High Efficiency Power Supplies

IDEC Corporation announces the PS5R-V line of DIN-rail power supplies, offering their customers high-efficiency in a compact form factor at competitive prices. These power supplies suit a wide range of needs in the industrial marketplace, and carry all of the required certifications necessary for use in these demanding applications. This next generation of the industry standard PS5R power supply family has updated features and specifications to meet current and future needs. The PS5R-V line of power supplies includes 10W, 15W, 30W, 60W and 120W versions, with additional versions coming soon. These power supplies have a very compact form factor with overall dimensions reduced by up to 25% from previous generations. The reduced form factors combine with DIN-rail mounting to free up valuable control panel space and reduce installation costs. Operating temperature ranges up to -25 to +75 degrees C offer more versatility. These extended operating temperature ranges often allow these p

TURCK M8 CORDSETS WITH 100 PERCENT SHIELDING OPTION PROTECT AGAINST EMI/RFI

TURCK is now offering the option to completely shield M8 picofast ® cordsets by connecting a braided shield directly to the coupling nut. This provides a cost-effective and reliable connection with 100 percent cable and connector shielding, which protects against electromagnetic and radio frequency interference. The 3 and 4-pin cordsets are available with flexlife ® PVC or PUR jacketed cable. All connectors deliver IEC IP 67 protection. The M8 picofast line, like most TURCK cordsets, provides male or female, straight and right angle connectors, standard and custom lengths, and pigtails or extensions. Fully encapsulated mating receptacles are also offered, completing the system.