B&K Precision Introduces New 5 1/2-Digit True RMS Bench Multimeter

B&K Precision today introduced its new 5 1/2-digit bench digital multimeter (DMM), the model 5492B, expanding its present 4 1/2-digit (2831E) and 50,000-count (5491B) DMM offerings. Featuring a 120,000-count display resolution, the 5492B provides 0.01% basic VDC accuracy along with a broad range of functions, and is suitable for any application requiring accurate and reliable measurements, all at an affordable price.

The 5492B offers many essential measurements for benchtop testing: DC voltage and true RMS AC voltage; DC current and true RMS AC current; two- and four-wire resistance; continuity; diode test; frequency; and period. The DMM also includes a variety of built-in math functions such as Rel, Max/Min, dBm, dB, %, limits, and Mx+B.

Additionally, the 5492B is equipped with an internal buffer capable of storing up to 512 readings at a rate of up to 57 readings/s. Buffer storage operation and retrieval can be completed from the front panel or via remote command. The multimeter can also calculate statistical information from the buffer such as the minimum, maximum, or average reading, and standard deviation of the stored readings.

Advanced triggering options are provided on the front and rear panel, which enable users to manually trigger a measurement from a key press, send a bus trigger via remote control, or input an external trigger signal. A VM Comp (voltmeter complete) output terminal is accessible to indicate the completion of a measurement.

Programmable via SCPI commands, the 5492B comes standard with USB and RS232 interfaces, and offers a built-in GPIB interface option (model 5492BGPIB) for labs and system integrators. PC remote control software is provided for front panel emulation or simple measurement data logging functions.

Available immediately, B&K Precision's 5492B and 5492BGPIB are listed at a price of $649 and $789 respectively.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more