Porvair System Used to Dry Oligonucleotide Samples

Porvair Sciences has announced that a manufacturer of ready-made oligonucleotides has standardised on its Ultravap Blowdown Station for the careful drying of its production samples. 'This important life-science customer has invested in five Ultravap systems in the US with two more on order and two to date installed in Europe,' said Steve Knight, sales and marketing manager at Porvair. 'For this customer looking to integrate a sample drying system into its production environment, the ability of the Ultravap to also automate dry down and store regularly used protocols was critical,' he added.

Designed to quickly and safely remove solvents from 96- or 384-well plates, the Ultravap Blowdown Station is a versatile tool that is proven to optimise microplate sample preparation productivity. The Ultravap achieves high sample throughput through advanced evaporator head technology and a manifold design that directly injects heated nitrogen into each individual well of the microplate simultaneously. The system is proven to remove most popular chromatography solvents in minutes.

For heat-sensitive and thermally labile samples, the Ultravap may be operated in a two-stage mode - combining rapid initial dry-down with carefully controlled final solvent evaporation. The Ultravap has been designed to be simple to install, operate and maintain. Installation simply requires connection to a gas supply/cylinder and standard mains socket. Safety of operation is ensured as the CE-marked compact unit fits into all fume cupboards.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more