Workstation Allows Small-Batch Chemical Production

The semi-automated RC1sp Small Scale Production Workstation enables the production of small batches of high-value chemicals for traceable, reproducible and more profitable reaction results. 'The RC1sp offers a safe and controlled way to produce building blocks, intermediates, pre-clinical batches and resin materials at the highest quality, even for the most sensitive and selective chemistry and precision-based business segments such as semi-conductors,' said Urs Groth, marketing communication manager, reaction engineering, Mettler Toledo.

'Consistency and quality in-lab ensures desired reactivity in downline processes,' he added. The flexible RC1sp workstation allows for partially or fully automatic processing. Manual process issues associated with round-bottom flasks and jacketed lab reactor setups can be eliminated. For safety under vigorous reaction conditions, the self-contained design reduces the risk of operator exposure to hazardous materials. The RC1sp's thermostat provides fast heating and cooling while keeping reaction temperature controlled, even in the presence of unanticipated exotherms. Standard operations such as catalyst additions or pH control are monitored and adjusted using Mettler Toledo's iControl RC1 software.

Because data quality is critical, iControl monitors desired process parameters along with nearly every other possible reaction variable while recording progress. Standard, easy-use graphic reports make it simple to compare and evaluate entire runs or individual recation steps. Combining the iControl software package with the RC1sp thermostat virtually guarantees consistent, reproducible reaction results - according to the company.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more