CTD Series Current Transformers

Carlo Gavazzi is pleased to announce the launch of the CTD Series, a new range of solid and split core current transformers that provide both innovation and functionality.

The CTD Series has been developed to provide the market with an application-oriented range of current transformers, which are easily installed, thus providing optimum safety and flexibility. They are connectable with all types of wiring terminals and can be installed on DIN-rail or directly to the back panel, therefore giving the possibility of bridging the secondary without changing the connections, thus avoiding dangerous over-voltages.

Split core transformers simplify installation by not requiring disconnection of the wire or busbar connection, whereas the CTD Series solid core transformers offer more precision and a more economical price. Furthermore their size allows their use where limited space is available amongst bus-bars, in applications such as those found within Motor Control Centres (MCCs) or Power Control Centres (PCCs).

Some of the key features include:
  •     Solid and split core types in 12 frame sizes
  •     Types for cable, horizontal and vertical busbar mounting
  •     Primary currents up to 2,000A AC
  •     Secondary currents of 1A or 5A AC
  •     Sealable terminal block covers
  •     2 to 10 bus-bar isolating fixing screws
  •     DIN-rail mounting holder and removable panel fixing clips
  •     Double screw terminals (up to 8 wiring connections)
  •     UL recognized and CSA approved
The CTD Series current transformers are available from Carlo Gavazzi’s North American network of sales offices / distributors.

Comments

Post a Comment

Popular posts from this blog

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more