Aaxeon Releases New 16-Port RS-232 to USB 2.0 Adapter

Aaxeon Technologies is proud to announce the release of our new 16-Port RS-232 to USB 2.0 serial adapter featuring screw locking capabilities. The new UTS-416AK is a serial adapter, designed for PC, thin client, or a server, providing instant COM port expansion via the Universal Serial Bus. The unit supports screw lock features for the upstream (USB type B) connector using screw locking USB cables. This feature prevents accidental USB cable disconnection.

The UTS-416AK provides the scalability to quickly adapt to new USB technology. Multiple modules may be added to a single USB interface allowing the user to add RS-232 connectivity as needed. Moreover, the UTS-416AK has Redundant Power Inputs allowing users to take advantage of both the DC jack and Terminal Block inputs at the same time. Our complete product line offers many choices to help the user expand their network using specific requirements.

With the USB Plug-and-Play feature, simply plug in the unit and follow the instructions of the Install Wizard. No unnecessary dealings with Card Slots, I/O addresses, IRQ jumpers, DMA, or other settings required when connecting devices. The system recognizes devices and installation of the drivers is automatic. The UTS-416AK is an ideal solution for your expanding applications.

Features:
  • Provides 16 RS-232 Serial Ports over USB 2.0 Port
  • USB 2.0 High Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible
  • Redundant Power Inputs with 12V DC Jack and Terminal Block
  • Provides 16 DSUB-9 Connectors with TX/RX LEDs
  • USB Screw Lock Mechanism Enhances the Reliability
  • Rigid Metal Case for Critical Applications
  • Supports Wide Range +7~24V DC Power over the 2-pin Terminal Block
  • Baud Rate up to 921.6Kbps
  • Supports 7,8 Data Bits and 1, or 2 Stop Bits
  • Odd, Even, Mark, Space, or None parity mode
  • Supports Wall Mount Bracket, Optional DIN RAIL and 19-inch Rack Mounting Brackets
  • Optional Settings to Provide +12VDC power over pin#9 of the DB9 RS232 Connectors

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more