Eazy-Gage Bundle for Linear Position Gauging Tasks

Macro Sensors has launched the Eazy-Gage bundle, which it describes as a complete 'out-of-the-box' solution for linear position gauging. Combining spring-loaded, AC-operated LVDT position sensors with an Eazy-Cal mini-module LVDT signal conditioner, the Eazy-Gage bundle is claimed to take the guesswork out of gauging applications by providing a fully calibrated and complete linear position gauging system ready for immediate operation.

Applications for the Eazy-Gage bundle include dimensional or position measurement in automotive factories, forges and foundries (large-shaft TIR measurements), metal fabricating shops, paper and/or plastic film plants, industrial process automation applications and process control. Macro Sensors said the Eazy-Gage bundle provides a cost-effective solution for operators without the equipment or ability to perform calibrations, those requiring a NIST-traceable calibration certificate, as well as field installations where calibration is not practical.

The bundle is also claimed to eliminate the need to specify electronics and gauge heads from different sources and calibrating them together. The Eazy-Gage bundle can be specified with a variety of Macro Sensors' model GHSA/R 750 series position sensors, which are available in stroke ranges from 0.10in to 4.00in. These heavy-duty, spring-loaded linear position transducers are said to offer consistent measurement in harsh dimensional gauging applications with high temperatures or hostile environments. Position sensors are calibrated with an Eazy-Cal MMX-1000 series mini module, a single-channel LVDT signal conditioner that operates on a nominal 15-30VDC power input and provides either a low-noise 0-10VDC or 4-20mA output.

Packaged in a DIN-rail mounting thermoplastic case, the Eazy-Cal LVDT signal conditioners can be remotely located by up to 100ft to facilitate LVDT operation in extreme environments. Cables are available in predetermined lengths from 6 to 100ft to suit specific installations. Each LVDT transducer and Eazy-Cal signal conditioner within an Eazy-Gage bundle is individually serialised to prevent mismatching in the field. Every Eazy-Gage bundle comes with full calibration data and either a Certificate of Calibration or NIST-traceable calibration certification. Calibration is warranted for one year from date of shipment.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more