Ecopac Power Launches the Mean Well LPF-40D Series, a 40-watt High Efficiency, High IP Rating 3 in 1 Dimmable Power Supply

The LPF-40D series has up to 89% of high efficiency potted with heat-conducted glue to meet IP67 rating fully enclosed by plastic casing to give 94V-0 fire prevention levels. This allows the internal shock absorption to withstand 5G vibrations and provide protection for the internal electronic components. With built-in active PFC function and input range of 90 - 305VAC the LPF-40D series not only meets the harmonic current limitation per EN61000-3-2 Class C, they also fulfil PF>0.9 if loading is over 50 - 60%. With cooling by only free air convection they can operate at full load from -40°C to +70°C ambient temperature

The LPF-40D series has the option to adjust the constant current output with either a 1~10Vdc or a 10V PWM signal or resistor, these offer system designers great flexibility for designing applications with energy saving and brightness reduction. Other standard functions include Class II AC input (without FG) design and protection for short circuit, over voltage, overload and over temperature.

These high efficiency power supplies are very suitable for LED street lighting, LED spotlights, outdoor displays, LED decorative lighting, or any application that needs a solution for a harsh environment with high dust and moisture. The LPF-40D series complies with global certificates per UL/CUL/TUV/CB/CE including UL8750, EN61347-1, EN61347-2-13 of lighting regulations, and meets 3.75KV surge immunity (EN61000-4-5).

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more