306-101 Highest Intensity 6mm Vibration Motor

Precision Microdrives has just launched the world's highest intensity output 6mm vibration motor. The 306-101 is the first of a new generation of parts which are now becoming introduced to the Pico Haptic™ range of miniature vibration motors. These motors are designed to offer higher performance haptic feedback and vibration tactile feedback in handheld and touch-screen based devices. The 306-101 6mm vibration motor is designed for applications and situations, for example in ruggedised instruments, where protective clothing might prevent the user or operator from feeling the vibration alert.

The 306-101 leaded vibration motor comes with AWG32 100mm leads and is designed to be integrated into circular mouldings within the application enclosure. The motor is part of a new generation of Ø6mm diameter x 10mm body motors, and it generates a significant 3.4G's (33.35 m/s² typical) of vibration intensity output at 11500 RPM (191 Hz). It is a high efficiency motor at 8 G/W output and the most powerful 6mm motor available on commercial sale. This makes it ideal for ruggedised haptic feedback implementations as well as miniature massaging applications.

The motor is rated at 3V DC and based on our standard Pico Haptic 3-pole coreless micro motor topology. Current draw is typically 140 mA, and the off-the-shelf part operates at temperatures from -10°C to +60°C, though these can be extended if required. This vibration motor like all those in our Pico Haptic™ range is quiet with a typical audible noise level of less than 40dBA. These vibration motors come in standard 6mm motor trays, and are available from stock in 1+ quantities.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more