IDENTControl Compact RFID Controller with CC-Link Communication

The IC-KP2-2HB18-2V1 is a compact RFID Controller with CC-Link communication.  CC-Link is a common upper-level bus system used almost exclusively by Mitsubishi PLCs.  These CC-link RFID controllers also support CC-Link V2.  This functionality facilitates extended cyclic settings resulting in a large data map, making it easier and faster to read and write large amounts of information to the RFID system.  These IP67 controllers are fully compatible with any Pepperl+Fuchs RFID read head for low frequency (125 kHz), high frequency (13.56 MHz) or ultra high frequency (915 MHz) operation.

“This two-head RFID controller communicates to both read/write heads simultaneously.  It also incorporates a new advanced RFID protocol that provides positive feedback to the user when a new tag has arrived, and allows for large read/write data blocks that are limited only by the read/write head's internal memory size,” says Tim Cicerchi, Product Manager, Pepperl+Fuchs.

Our RFID controllers are the most rugged in the industry due to their powder-coated zinc alloy housing.  M12 connectors facilitate quick connection of the read heads, power, CC-Link in, and CC-Link out cables.  A Y cable accessory is available that enables the CC-Link RFID controllers to be daisy chained and hot swappable without disturbing other CC-Link devices on the network.  Also, a terminator is available for applications where the CC-Link RFID controller is the last device in line.


Popular posts from this blog


Top 5 Applications for Inductive Sensors on Packaging Machines

How LVDT Pressure Sensors Work?