Get Even More Versatility and Further Improve Productivity with the World's Most Compact Type 3 Safety Laser Scanners

The OS32C Safety Laser Scanner from Omron Scientific Technologies Inc. is now available in 30, 40, 50 and 70 mm resolutions. This makes the OS32C an ideal safeguarding solution covering a wider array of area and machine safety applications, including point-of-entry hand detection applications and other instances where safety light curtains are simply too large to fit or may impair productivity. It also enables the OS32C to be mounted closer to the pinch point, which can help increase machine productivity and optimize valuable floor space.

Further enhancing safety and productivity, the latest version (1.4.2) of the OS32C configuration tool enables users to copy and paste zones and zone sets to significantly reduce programming time. Version 1.4.2 also offers record system monitoring and playback to help users troubleshoot false nuisance intrusions, as well as configuration checksum functionality to help identify any program tampering after equipment has been commissioned. It provides troubleshooting tips in the fault log, and makes available additional zone shapes.

Additional OS32C updates include an improved standby mode that minimizes the potential for optical interference with other equipment on the factory floor, as well as the ability to invert the 7-segment display in applications where the scanner needs to be mounted upside down.

The OS32C features a compact 104.5 mm profile, light 1.3 kg weight and low 5 W power consumption (3.75 W in standby mode). Combined with innovative features such as highly flexible and easily configurable detection zones, the OS32C is not only easy to handle and install, but also delivers the versatility needed to solve diverse presence detection and collision avoidance application needs.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more