PoE Switches For Security Surveillance Tasks

Axiomtek has introduced the Icon-78000 series of industrial harden managed Power of Ethernet (PoE) switches, suitable for outdoor applications such as PoE IP cameras, PoE access points and intercoms. The switches have a wide operating temperature range (-40C to +75C) for extreme environments. The Icon-78000 series features eight PoE ports and provides two Gigabit Ethernet ports and two 10/100base-FX ports, enabling high-speed communications for many industrial applications.

Supporting PoE on ports one to eight, the Icon-78000 series can power IEEE802.3af-compliant devices and transmit data simultaneously, which helps save wiring costs. To provide non-stop Ethernet connection, the Icon-78000 series supports a-Ring technology, which provides fast network recovery within 15ms. The switches' compact size with DIN-rail mounting facilitates installation into control cabinets. The Icon-78000 series provides a flexible and cost-effective solution for device manufacturers wanting to transform existing devices.

Axiomtek's Icon-78000 series supports advanced features such as 802.1Q VLAN, port trunking, IGMP snooping, a rapid spanning tree for redundancy, QoS for priority queuing and port mirroring. Users may choose from SNMP/RMON, web browser or telnet for remote monitoring and configuration. The Icon-78000 series also supports rate control, which allows users to set the maximum bandwidth on each port individually. The device comes equipped with a 48VDC redundant power input via a terminal block or power jack and is secured with power polarity reverse and an overload current resettable fuse. The Icon-78000 series meets Safety Agency requirements and has passed heavy industrial EMI/EMS testing.

Philip Wei, product manager of the Applied Computer and Network Device business unit at Axiomtek, said: 'Axiomtek's extremely rugged Icon-78000 managed PoE Ethernet switches are widely used in security surveillance applications in heavy-duty environments. 'The Icon-78000 series can be used to power IEEE802.3af-compliant powered devices through an Ethernet cable, eliminating the need for additional wiring. 'The compact metal housing with an IP30 rating helps dissipate heat efficiently and protects against the dust and dirt.

'Using an SNMP management console, MIS administrator can manage the switches everywhere. 'Our Icon-78000 industrial PoE Ethernet switches keep your industrial Ethernet applications running non-stop,' he added. The Icon-78000 series features front-facing light-emitting-diode indicators that provide link activity, transmission speed and PoE output status. To fit various application requirements, the device can be DIN-rail, panel or rack mounted.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more