HBM Introduces Analogue Output Module For QuantumX

HBM has announced the MX878 QuantumX analogue output module, which can be used for test bench applications involving the conversion of various transducer signals, for example. The latest module for the QuantumX data-acquisition system measures all commonly used physical quantities and makes them available as standardised analogue voltage outputs. The MX878 features eight analogue voltage outputs that can be individually configured, enabling system signals to be output as scaled and filtered values in the range of +/-10V.

Any amplifier signal can be used as a signal source to simplify the individual monitoring or forwarding of system signals, such as measured values. The module is designed to increase the flexibility and capability of the QuantumX data-acquisition system by providing integrated local intelligence that enables measured values to be analysed, or offset against each other, in real time using algebraic operations. The module also features functions for the computation of peak value or root mean square value.

Computed signals can be made available in the system in real time or can be output directly. The MX878 module is designed to complement the range of QuantumX amplifiers. All functions and outputs can be configured directly using the QuantumX Assistant software, Labview Vis. Alternatively, individual programs can be used via the integrated QuantumX programming interface (API) for .Net or .Com, while HBM's CatmanAP software provides options for configuration, data acquisition, visualisation and analysis.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more