Cognex Launches High-Resolution Vision System

Cognex has introduced a high-resolution, self-contained vision system for applications such as high-accuracy gauging, finding small edge defects or reading ID codes from dozens of palletised products. The In-Sight 5605 includes a range of features, such as full 5.0-megapixel resolution, support for Gigabit Ethernet communication, an IP67 rating to withstand dust and wash-down and a library of Cognex vision tools to facilitate application setup and performance.

According to Bhaskar Banerjee, business unit manager for vision systems, the In-Sight 5605 offers more than twice the resolution previously available with any In-Sight system. Banerjee added that more pixels are available as well as support for GigE communication. In conjunction with the launch, Cognex will host a free webinar to introduce the In-Sight 5605 on 15 July at 10:00. Cognex has also released a new version of its In-Sight Explorer software. In addition to supporting the new In-Sight 5605, In-Sight Explorer 4.4.1 adds several key features and improvements, including Cognex 1DMax, a 1D barcode reading tool optimised for omnidirectional barcode reading.

Cognex 1DMax provides an excellent reading capability for codes that are difficult to read owing to damage, blur, reflections and low contrast, according to the company. In-Sight Explorer 4.4.1 also features support for multiple simultaneous connections to the In-Sight Modbus TCP server; the ability to generate output pulse trains and clocked data pulses for controlling devices such as stepper motors; and enhancements to Mitsubishi robot communications.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more