Oxley LED Indicators for Panel Applications

Oxley Developments has launched the CLH range of LED indicators for use in all types of LED panel applications. The CLH LED indicators are said to offer high-intensity light output and excellent optical features in a range of standard colours, including warm white. The range is constructed to operate in demanding environments and includes non-voltage and voltage, bi-colour and tri-colour in a variety of colour combinations and, for sub miniature, a press-fit mounting.

Optical features include high brightness in both wide and focused viewing angles, sunlight readability, ESD protection, NVIS friendly, and tag terminations. Oxley said the lamps are also available with flying leads and standard LED pin terminations. The modular design of the lamps allows the customer to order a bespoke solution to suit their requirements, choosing their specifications from a range of options and operating voltages. The lamps are sealed against immersion to IP66 and offer high corrosion resistance over an operating temperature range of -40C to +100C.

The lamps have been developed to provide a rugged fit-and-forget solution with features such as AC and DC operating voltages ranging from 5VDC/VAC to 28VDC/VAC, according to Dave Howell, LED business manager at Oxley. The complete range of Oxley LED panel lamps is available in small quantities through RS Components and Farnell and for larger volumes through Oxley specialist UK distributors Alpha 3, Aerco and Charcroft.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more