Solderless LED Socket is Easily Positioned

TE Connectivity has announced a new addition to its line of solderless LED sockets - the RoHS-compliant Type BR socket, for quick termination of Bridgelux RS LEDs. This offering eliminates the need to design, manufacture and integrate a complex metal-clad printed circuit board assembly into a lighting fixture. Additionally, it provides lighting designers with a broad range of LED mounting options, as it can be easily positioned and assembled anywhere in a fixture using simple hand tools.

This one-piece connector assembly features TE's poke-in wire termination method for 18 through 22 AWG solid wires, 18 through 20 AWG pre-bonded wires and 18 AWG stranded wires. Included standoff posts position the solderless LED socket assembly onto the heat sink and only four M3 or #4 screws are required to secure and complete the assembly. The LED is retained in the socket housing with a slight press fit prior to mounting the assembly into the light fixture. For enhanced integration capabilities, the socket design accepts the commercially-available LEDIL Britney series of optics.

Alternatively, ample space is available for use with other custom optical solutions. Additional product features include a cleared area, designated for reflector mounting, which accepts custom or commercially available optics; integral wire strain reliefs to prevent inadvertent wire pull out after assembly; and UV-resistant housing material for outdoor use, to prevent housing discoloration. The socket is UL-recognised to UL 1977 for use in UL 8750 applications.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more