Tools Allow Rotating Machinery to be Inspected

SKF has introduced two portable, compact, easy-to-use, multi-function Stroboscopes, allowing rotating or reciprocating machinery to be inspected safely and efficiently while in operation. The Stroboscope TKRS 10 and TKRS are high quality instruments that, as well as being ergonomically designed, incorporate unique functions such as the phase shift mode facility, allowing the object of interest to be rotated to the correct position for viewing.

As an essential instrument for maintenance technicians, both stroboscopes are useful for operator-driven reliability (ODR) programmes. The TKRS 10 and TKRS 20 stroboscopes are suited for both machine operators and maintenance technicians, enabling a range of reciprocating equipment such as fan blades, couplings, gear wheels, machine-tool spindles and belt drives to be inspected in running operation. The TKRS stroboscope series enable the flash rate to be adjusted in seconds.

The phase-shift feature allows the object of interest to be positioned for easy viewing. The TKRS 10 model has a maximum flash rate of 12,500 flashes per minute and a xenon tube light source, and is suitable for operator-driven reliability programmes. For more demanding applications, the TKRS 20 model has a maximum flash rate of 300,000 flashes per minute and a powerful LED light source, making it suitable for use for most outdoor applications. Additionally, this model enables up to 10 user-programmable flash-rate memories to be quickly recalled; a useful feature when inspecting similar machines.

The TKRS 20 model has been designed to give engineers enhanced functionality and performance with up to 12 hours of operation before recharging. It is supplied with a remote laser sensor that enables the flash rate to be easily triggered and also allows the stroboscope to be used as a tachometer. Both TKRS stroboscopes have an easy-to-read LCD display, feature a tripod mounting thread for ease of use for extended periods and are supplied in a sturdy case with universal charger. The TKRS 10 and TKRS 20 incorporate the latest technology and design features for improved reliability and performance, and are part of SKF's comprehensive range of tools and instruments.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more