Distance Measurement Tool for Offshore Workers

Cordex Instruments has launched the Lasermeter3000XP, a custom-designed distance measurement tool that is said to be well suited for offshore workers. The anti-hazard handheld measuring device complies with stringent offshore health and safety regulations. The handheld tool with its robust IP65 flameproof design is Atex and IECEx Zone 1 IIC T4 hazardous (explosive) area certified.

This makes it a suitable device for offshore personnel working on high-risk rigs and installations who currently have to obtain 'hot work permits' to use standard electronic measuring devices. The laser meter has been built to last, with a rugged industrial-grade construction. Encased in tough aluminium, it can withstand harsh environments, accidental falls or knocks.

The Lasermeter3000XP is also easy to use, according to Cordex, with simple operating functions to cater for workers in hazardous locations wearing protective kit and gloves - offering speedy and accurate distance, volume and area measurement within explosive areas.

The Lasermeter3000XP distance meter can be used within a Zone 1 IIC T4 hazardous (explosive) area. The IP65 design incorporates shock-resistant, antistatic over-mould with interchangeable battery pack and backlit LCD display. It is capable of measuring distances of up to 30m with an accuracy of 3mm. It comes with features such as Pythagoras and area and volume calculations.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more