PDF3D Version 2 Compatible with Adobe Reader X

VTS' PDF3D is confirmed to be compatible with Adobe Reader X (version 10), including the highly compressed 3D PDF document platform offering more secure viewing and comment markup. PDF3D Version 2 is compatible with the latest Adobe Reader X (version 10) including high-performance PRC (Product Representation Compact) encoding for 3D models. The latest Adobe Reader X can open and display any 3D PDF document using the Protected Mode for improved security, and enable markup commenting tools that can be saved and shared with others.

Employing PDF3D geometric tolerance based PRC encoding, Acrobat and Adobe Reader X-compatible 3D generation is available with immediate effect. Coupled with the latest viewing platform, PDF3D documents may now be protected for more secure environments, while allowing full 3D interactive menus, animation and annotations following ISO-24517-1:2008 PDF/Engineering draft standard. The security of 'Protected Mode' helps safeguard software and data from potentially malicious attacks. Comments, notes and review feedback can be saved to file as highlighted bubbles, sticky notes or highlighted text on any PDF page and distributed to remote members of a review team.

PDF3D generates 3D PDFs using the PDF3D Reportgen desktop application or with PDF3D-SDK (Software Development Kit) on Windows and Linux 64-bit platforms serving the needs of technical, scientific, aerospace, general machinery, automotive and manufacturing communities, as rich 3D PDF documents with Adobe Reader X-compatible compression enable expanded workflows, make new applications possible and extend the reach to remote enterprise teams and clients.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more