NXP Enables Cost-Efficient and Flexible LED Ambient Lighting Solutions for the Car

NXP Semiconductors N.V. (NASDAQ: NXPI) – the world’s largest supplier of in-vehicle networking semiconductors – today introduces the UJA1018, a compact integrated solution that supports cost-efficient and flexible LED ambient lighting applications in vehicles. The UJA1018 is designed for LIN networks (Local Interconnect Networks) and is the first ASSP (Application Specific Standard Product) for ambient lighting with Node Position Detection. This enables LIN addresses of LED modules to be individually programmed after being installed in the car, rather than during module manufacturing. Ambient LED lighting is increasingly popular in the automotive industry. Car manufacturers are using it as a differentiator to enhance the driving experience. It also enables OEMs to emphasize their car brand via the color and styling of the interior lighting, while car dealers can offer consumers the option of customizing the lighting settings.

Whereas interior LED modules are currently programmed during the module manufacturing process, with NXP’s new Node Position Detection method, based on an integrated LIN switch, all LED modules can be individually configured even after being mounted in the car. This offers new levels of flexibility while drastically reducing manufacturing logistics and costs.

The UJA1018 integrates all analog functions to create a compact ambient lighting solution, including LIN transceiver, LIN switch for Node Position Detection, voltage regulator for microcontroller and drivers for 3-color LED. In addition, the compact HVSON package enables the creation of small form factor modules. The UJA1018 fulfills the robustness requirements from the OEMs and also meets the SAE J2602 and LIN conformance.

“With the UJA1018 and its unique Node Position Detection technology based on LIN switch, NXP enables car OEMs to offer personalized ambient lighting solutions to end consumers. At the same time it saves system costs and simplifies logistics for both OEMs and Tier1 suppliers,” says Toni Versluijs, general manager of In-Vehicle Networking, NXP Semiconductors. “This underpins our leadership position as the de-facto In-Vehicle Network solution provider and our commitment to connect the car in present and in future”.

Dr. Herbert Wambsganß, head of development at HELLA Interior Lighting Systems commented: “The UJA1018 enables HELLA to introduce a very compact LED ambient lighting solution that fits every interior location. The Node Position Detection by means of the integrated LIN switch allows configuration of each ambient lighting module once mounted in the car. Thus, all modules in the car can be kept the same which allows a high level of reuse and greatly simplifies the logistics.”

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more