Lumex Launches New High-Powered LED Technologies

Lumex announces the launch of two new high-power TitanBrite LED technologies provide bright, intense light with low power consumption.

The TitanBrite 5-watt LED delivers light intensity of up to 250 lumens of brilliant white light at 700mA of current. Compatible with most surface mount processes, TitanBrite 5-Watt LEDs are ideal for use in spot lighting applications including display lighting, sign/graphic backlighting, medical device usage, emergency indication, architectural and decorative lighting, high-end appliances, or for any application that calls for high intensity point source lighting.

SuperBeam, the first high-power 1-watt LED technology to be offered in through-hole design in the North American market, is designed to focus intense light into a narrow beam. The through-hole design is well-suited for applications like flashlights that do not adopt surface mount configurations.  SuperBeam is ideal for applications requiring small spotlighting such as a flashlight beam in a retail showcase, smaller medical device applications, or any application that calls for bright illumination with a narrow focused beam.

“The TitanBrite 5-Watt and SuperBeam LED technologies further expand Lumex’s comprehensive family of high-powered LED products,” explained Richard Halliday, Director of Sales and Marketing at Lumex. “Lumex’s ability to deliver industry-leading technical support to help companies integrate these technologies in a way that closely matches their human interface goals further sets these products apart.”

TitanBrite 5-Watt LEDs are available in cold, warm and neutral white for enhanced product differentiation. Cold white colors project brightness and cleanliness while warm white shades project a more natural and ‘soft’ looking light.

TitanBrite 5-Watt LEDs are 10mm x 10mm in size with domed lenses and are RoHS compliant. Production quantities are available in 8 - 10 weeks.  Pricing is dependent on color specified and quantity ordered, and is approximately $10 per unit in 10K quantities.

SuperBeam LEDs provide an optical efficiency of 35 lumens per watt with a tight beam angle of 25 degrees.  This 10mm package is available in cold, warm and neutral white as well as in red, yellow, blue and green for product differentiation opportunities. Production quantities are available in 8-10 weeks. Pricing is dependent on color and quantity ordered and is approximately $2 per unit for 10K quantities.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more