Hydrogen Generator Suits Gas Chromatography Tasks

Quantitech has launched the LNI Schmidlin range of gas generators, including the H2-FID hydrogen generator for emission monitoring companies and laboratory applications. The H2-FID hydrogen generator is said to be ideal for operation with flame ionisation detectors (FID), providing a source of pure hydrogen fuel gas at up to 10.5 bar that compares well with cylinder gas.

The small contained volume (less than 40ml) also makes the H2-FID safe for operation in spaces where hydrogen cylinders are restricted and an automatic shutdown procedure places the unit on standby in the event of any internal error. The latest solid Polymer Electrolyte Membrane technology available means that users of the H2-FID only require pure water (distilled/de-ionised) for trouble-free long-term operation.

Dominic Duggan, sales director at Quantitech, said: 'Infrequent, inexpensive service requirements make the H2-FID a perfect choice for emission monitoring companies, especially where shipping or site use of cylinders is a problem. 'The LNI gas generator range will also prove popular with laboratories, for example, to provide carrier gas for gas chromatography (GC) instruments. 'We believe that the elimination of cylinder shipping, handling and refilling combined with no flammable, high pressurised gas storage will also appeal to customers.

Comments

Post a Comment

Popular posts from this blog

What is Class I Division 2?

Image
A Class I Division 2 is a location: (1) In which volatile flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are handled, processed, or used, but in which the liquids, vapors, or gases will normally be confined within closed containers or closed systems from which they can escape only in case of accidental rupture or breakdown of such containers or systems or in case of abnormal operation of equipment, or (2) In which ignitable concentrations of flammable gases, flammable liquid-produced vapors, or combustible liquid-produced vapors are normally prevented by positive mechanical ventilation, and which might become hazardous through failure or abnormal operation of the ventilating equipment. Class I Division 2 Classification Class I Division 2 refers to the ANSI/ISA 12.12.01 standard. This standard was previously UL1604 until UL recommended the newer ANSI/ISA standard be used and that all hazardous location products be certified under this standa...
Read more

FUSE SIZING CONSIDERATIONS FOR HIGHER EFFICIENCY MOTORS

Image
When selecting the proper fuse for short circuit protection in motor starting applications, it is important to not only ensure that the fuse will not nuisance open during motor start up times, but also that the fuse will coordinate as required with overload relays. When sizing fuses between 125% and 150% of the motor nameplate current, several advantages, including ease of coordination with an overload device, a smaller disconnect, and increased short circuit protection from a lower fuse rating, can be achieved. However, if sizing at this level prevents the motor from starting, it may then be necessary to increase the fuse ampere rating and it then becomes important to know the NEC sizing limitations. As of June 1, 2016, the US Department of Energy has mandated that newly manufactured electric motors will need to meet NEMA Premium® efficiency standards. As motor efficiencies increase, motor locked rotor currents can also be expected to increase. In addition to this, with across-the-lin...
Read more

7/8 16UN Connectors that Provide 600 Volts and 15 Amps

TURCK announces new A-Size 3 and 4-pin 7/8 16UN powerfast™ connectors that provide up to 600 Volts and 15 Amps of power. These IP67 rated connectors provide a modular wiring system designed to handle high current applications for machine power distribution, while providing resistance to vibration commonly associated with conveyors, motors and material handling applications. The cordsets are available with a tray rated, exposed run PVC flexlife ® cable, with or without STOOW rating, and 14 AWG wires that allow you to replace hard wiring with a robust, quick disconnect system that saves the time and money spent installing a conduit system. The A-Size powerfast line offers male and female, straight connectors, standard and custom lengths, and pigtails or extensions. To make the system complete, fully encapsulated mating receptacles, with 1/2”-14 NPT mounting threads are available.
Read more